Our customer service department answers many questions regarding our industrial sand products for all the industries we serve. The questions range from extraction of the material to use and storage. As a resource to our customers and website viewers, the listing below represents the most frequently asked questions. 


Is product delivery available directly to the customer's location?
Yes. Through highly advanced supply chain capabilities and an expert staff, Pioneer Sands works closely with customers to arrange for reliable transportation directly to their locations. Depending on the Pioneer Sands site that services you, we offer either truck or rail delivery options.
Where does Pioneer Sands have rail access?
Two of our operations have rail capabilities. Our Bakersfield Operation has BN access and our Brady Operation has BN & UP access. For our customer's convenience, Pioneer Sands posts monthly fuel surcharge rates in the Services section of our website.
What are Pioneer Sands' packaging options?
For customers who prefer to have product delivered packaged rather than in bulk, Pioneer Sands can provide its high quality silica sands in 50 lbs., 100 lbs., or 3,000 lbs. Super Sacks. Bagged material is provided with shrink wrapping on palettes for the customer's handling and storage convenience.
Can Pioneer Sands load product in containers?
Yes. We have the ability to load containers at our Brady and Bakersfield Operations. This enables us to reach and service our overseas customers.
What is the silica content of Pioneer Sands industrial sands?
Depending on the Pioneer Sands site that produces high quality silica sands, the silica content will vary from 80% to 99.5%. For more information about a plant's specific chemical properties, please contact our inside service representative at 866-780-0974.
Are Pioneer Sands' sands washed and screened for specific environmental needs?
Yes. All of Pioneer Sands' high quality sand products are washed to remove silts, clays and other impurities. Pioneer Sands screens its high quality sands to meet exacting specs for various environmental applications.
Does Pioneer Sands carry large inventories of finished product?
Yes, in order to best serve our customers who do not have large storage capabilities, Pioneer Sands has adequate storage of finished product at all of its operations. This gives our customers the confidence and flexibility to manage their material balance for optimum profitability and service to its own customers.
What size sand do I need for a specific well screen slot-size?
The general rule of thumb is to select a sand size which will have about 10% passing through the well screen slot openings. The slot size is determined by examining and analyzing the cuttings recovered from the borehole. A slot size is then selected which allows water to freely enter the well while holding back the majority of the aquifer material. If the slot size is too large or the sand is too small, sand will pass through the screen along with the water, go through the pump and enter the distribution lines.
What test methods are available to determine the quality of water filtration sands?
The most common test methods for this are found in the AWWWA B100 Standard. The high quality sand that we have available at our Bakersfield and Brady operations meet and exceed this quality standard.
Do you sell filtration media other than silica sand?
Yes, we have relationships with other filtration media producers, therefore, upon request, Pioneer Sands can offer support gravel, anthracite, and garnet, along with our high quality filtration sands.
What is the advantage of using a high-silica and rounded sand in constructing a water well?
A high-silica sand is resistant to the effects of acid well rehabilitation treatments. Since silica is inert it will not impart and adverse impacts on the quality of your well water. Rounded sand grains provide the highest porosity and permeability, are less likely to compact during well development and will also allow the well development procedure to be as effective as possible.
Can you tell me how much sand I need to gravel pack my water well?
For our customers convenience, we have an interactive gravel pack volume calculator on our website here.
What is Colorado Silica Sand®?
Colorado Silica Sand® is a registered trademark of Premier Silica which refers to the silica sand that we mine and produce at our Brady, TX, plant. Colorado Silica Sand® is the best filtration sand available in the marketplace today and is a symbol of quality in the filtration market. We ship this sand all over the world.
Does Pioneer Sands sand for environmental applications meet NSF 61 standards?
Yes, our Brady and Bakersfield sand meets NSF 61 standards. NSF Standard 61 addresses crucial aspects of drinking water system components: whether contaminants that leach or migrate from the product/material into the drinking water are above acceptable levels in finished waters.
Pioneer Sands LLC
5205 N. O'Connor Blvd., Ste. 200, Irving TX 75039
main: (800) 947-7263

employment verification: (800) 367-5690; code=13010
FACILITY CONTACT INFORMATION

For product information • ps-salesinfo@pxd.com
For general information • ps-info@pxd.com
For accounting information • ps-accounting@pxd.com
 
©2018. All content on this site is copyrighted and may not be
reproduced or distributed without prior consent from Pioneer Sands.
Your use of this website constitutes acceptance of the Privacy Policy and Terms and Conditions.